home *** CD-ROM | disk | FTP | other *** search
- ; VT300.INI - MS-DOS Kermit keyboard setup for DEC VT200-300 series terminals.
- ; Originally contributed by Kevin Lowey, University of Saskatchewan Computing
- ; Services. For use only with MS-DOS Kermit 3.10 or later. Adapted for new
- ; features of version 3.10 at Columbia University. Further modified by Kevin
- ; Lowey to correct some problems in the original keyboard layouts.
- ;
- ; Two different setups are provided, one for the 101-key extended PC keyboard,
- ; one for the 88-key original keyboard. This file (when used with MS-DOS
- ; Kermit 3.10 or later) automatically determines which kind of keyboard you
- ; have. See the comments in the file to learn the key assignments.
- ;
- ; NOTE: The key assignments made by this file comprise just one of an infinite
- ; number of possible arrangements. No two people agree about how best to map
- ; DEC keyboard keys to IBM PC keys. If the mappings done by this file do not
- ; suit your taste, feel free to make modifications.
- ;
- ; Usage: TAKE VT300.INI (or put this command in your MSKERMIT.INI file).
- ; If you will be emulating a VT220 or VT320 terminal on a DEC VAX computer
- ; VMS 5.0 or later, and you have an 8-bit (no-parity) connection to it,
- ; also uncomment the following command:
- ;
- ;;; SET TERMINAL DISPLAY 8
-
- ; If you need to use the ISO Latin-1 character set in the 7-bit environment
- ; with the host sending Shift-In/Shift-Out (Ctrl-N/Ctrl-O) to switch between
- ; ASCII and special characters, uncomment the following command:
- ;
- ;;; set terminal character-set latin1 G1
-
- ; Standard VT terminal settings
- ;
- set term tabs at 1:8
-
- ; Version test
- ;
- if not < version 310 goto systest
- echo VT300.INI requires MS-DOS Kermit Version 3.10 or later.
- pop
-
- ; System check
- ;
- :systest
- if eq "\v(platform)" "IBM-PC" goto kbtest
- echo VT300.INI is only for IBM PCs, PS/2s, and compatibles.
- pop
-
- ; Automatic keyboard test
- ;
- :kbtest
- if equal "\v(keyboard)" "88" goto kb88
- if equal "\v(keyboard)" "101" goto kb101
- echo Keyboard type "\v(keyboard)" not supported by VT300.INI.
- pop
-
- :kb101
- echo VT300.INI: IBM-101 Extended Keyboard Setup...
- ;
- ; ***************** IBM-101 Extended Keyboard Definitions ******************
- ; IBM KEY DEC KEY
- ; Numeric Keypad
- ; There are two definitions for each of the numeric keypad keys,
- ; one for when <NUM-LOCK> is pressed, and one when it isn't.
- set key \850 \kkp0 ; Keypad 0 (Numlock) Keypad 0
- set key \338 \kkp0 ; Keypad 0 (Normal) Keypad 0
- set key \847 \kkp1 ; Keypad 1 (Numlock) Keypad 1
- set key \335 \kkp1 ; Keypad 1 (Normal) Keypad 1
- set key \848 \kkp2 ; Keypad 2 (Numlock) Keypad 2
- set key \336 \kkp2 ; Keypad 2 (Normal) Keypad 2
- set key \849 \kkp3 ; Keypad 3 (Numlock) Keypad 3
- set key \337 \kkp3 ; Keypad 3 (Normal) Keypad 3
- set key \843 \kkp4 ; Keypad 4 (Numlock) Keypad 4
- set key \331 \kkp4 ; Keypad 4 (Normal) Keypad 4
- set key \844 \kkp5 ; Keypad 5 (Numlock) Keypad 5
- set key \332 \kkp5 ; Keypad 5 (Normal) Keypad 5
- set key \845 \kkp6 ; Keypad 6 (Numlock) Keypad 6
- set key \333 \kkp6 ; Keypad 6 (Normal) Keypad 6
- set key \839 \kkp7 ; Keypad 7 (Numlock) Keypad 7
- set key \327 \kkp7 ; Keypad 7 (Normal) Keypad 7
- set key \840 \kkp8 ; Keypad 8 (Numlock) Keypad 8
- set key \328 \kkp8 ; Keypad 8 (normal) Keypad 8
- set key \841 \kkp9 ; Keypad 9 (Numlock) Keypad 9
- set key \329 \kkp9 ; Keypad 9 (Normal) Keypad 9
-
- set key \334 \kkpminus ; Keypad + Keypad -
- set key \2382 \kkpcoma ; ALT Keypad + Keypad ,
- set key \851 \kkpdot ; Keypad . (Numlock) Keypad .
- set key \339 \kkpdot ; Keypad . (normal) Keypad .
- set key \4365 \Kkpenter ; Keypad Enter Keypad Enter
-
- ; F1 PF1 (default Kermit)
- ; Use GOLD.COM to make Num Lock work as F1/PF1/Gold.
- set key \4399 \kPF2 ; Keypad / PF2
- set key \311 \kPF3 ; Keypad * PF3
- set key \330 \kPF4 ; Keypad - PF4 Key
-
- ; F1 thru F20 keys IBM DEC
- set key \1374 \kholdscrn ; Control-F1 F1
- set key \1375 \kprtscn ; Control-F2 F2
- set key \1376 \khelp ; Control-F3 Setup
- ; No Definition ; Control-F4 F4
-
- ; Default mapping ; F1 Gold (PF1)
- ; Default Mapping ; F2 PF2
- ; Default Mapping ; F3 PF3
- ; Default Mapping ; F4 PF4
- set key \319 \kbreak ; F5 Break
- set key \320 \Kdecf6 ; F6 DEC F6
- set key \321 \Kdecf7 ; F7 DEC F7
- set key \322 \KdecF8 ; F8 DEC F8
- set key \323 \KdecF9 ; F9 DEC F9
- set key \324 \KdecF10 ; F10 DEC F10
- set key \389 \kdechelp ; F11 DEC Help
- set key \390 \kdecdo ; F12 DEC Do
- set key \2408 \kdecF11 ; Alt-F1 F11
- set key \2409 \kdecF12 ; Alt-F2 F12
- set key \2410 \kdecF13 ; Alt-F3 F13
- set key \2411 \kdecF14 ; Alt-F4 F14
- set key \2412 \kdechelp ; Alt-F5 Help (F15)
- set key \2413 \kdecdo ; Alt-F6 Do (F16)
- set key \2414 \kdecF17 ; Alt-F7 F17
- set key \2415 \kdecF18 ; Alt-F8 F18
- set key \2416 \kdecF19 ; Alt-F9 F19
- set key \2417 \kdecF20 ; Alt-F10 F20
-
- ; Cursor Keypad
- set key \4434 \kdecinsert ; Gray Insert DEC Insert Here
- set key \4435 \kdecRemove ; Gray Delete DEC Remove
- set key \4423 \kdecFind ; Gray Home DEC Find
- set key \4431 \KdecSelect ; Gray End DEC Select
- set key \4425 \KDecPrev ; Gray Page Up DEC Prev Screen
- set key \4433 \KDecNext ; Gray Page Down DEC Next Screen
- pop
-
- :kb88
- echo VT300.INI: IBM-88 Original Keyboard Setup...
- ;
- ; Key Definitions:
- ;
- ; The numeric keypad is mapped as follows:
- ;
- ; IBM Function VT100 Keys
- ; Normal Shifted On the Numeric Keypad
- ; ------------------------- -------------------------
- ; | F1 | F2 | SF1 | SF2 | | PF1 | PF2 | PF3 | PF4 |
- ; |-----+-----+-----+-----| |-----+-----+-----+-----|
- ; | F3 | F4 | SF3 | SF4 | | 7 | 8 | 9 | - |
- ; |-----+-----+-----+-----| |-----+-----+-----+-----|
- ; | F5 | F6 | SF5 | SF6 | | 4 | 5 | 6 | , |
- ; |-----+-----+-----+-----| |-----+-----+-----+-----|
- ; | F7 | F8 | SF7 | SF8 | | 1 | 2 | 3 | |
- ; |-----------+-----|-----| |-----------+-----|ENTER|
- ; | F9 | F10 | SF9 | F10 | | 0 | . | |
- ; ------------------------- -------------------------
- ;
- ; F9 is defined as DEC's Keypad-0 key.
- ; F10 is defined as DEC's Keypad-Enter key.
- ; SF9 is defined as DEC's Keypad-DOT key.
- ;
- ; The DEC F1 to F10 keys are mapped to the PC's Ctrl-F1 through Ctrl-F10 keys.
- ; The DEC F11 to F20 keys are mapped to the PC's Alt-F1 to Alt-F10 keys.
- ;
- ; Definition PC key DEC key
- set key \315 \kpf1 ; F1 PF1
- set key \316 \kpF2 ; F2 PF2
- set key \317 \kkp7 ; F3 Keypad 7
- set key \318 \kkp8 ; F4 Keypad 8
- set key \319 \kkp4 ; F5 Keypad 4
- set key \320 \kkp5 ; F6 Keypad 5
- set key \321 \kkp1 ; F7 Keypad 1
- set key \322 \kkp2 ; F8 Keypad 2
- set key \323 \kkp0 ; F9 Keypad 0
- set key \324 \kkpenter ; F10 Keypad Enter
-
- set key \852 \kpf3 ; Shift-F1 PF3
- set key \853 \kpf4 ; Shift-F2 PF4
- set key \854 \kkp9 ; Shift-F3 Keypad 9
- set key \855 \kkpminus ; Shift-F4 Keypad Minus
- set key \856 \kkp6 ; Shift-F5 Keypad 6
- set key \857 \kkpcoma ; Shift-F6 Keypad Comma
- set key \858 \kkp3 ; Shift-F7 Keypad 3
- set key \859 \kkpenter ; Shift-F8 Keypad Enter
- set key \860 \kkpdot ; Shift-F9 Keypad Dot
- set key \861 \kkpenter ; Shift-F10 Keypad Enter (duplicate)
-
- set key \1374 \kholdscrn ; Control-F1 F1
- set key \1375 \kprtscn ; Control-F2 F2
- set key \1376 \khelp ; Control-F3 Setup
- ; No Definition ; Control-F4 F4
- set key \1378 \kbreak ; Control-F5 F5
- set key \1379 \kdecF6 ; Control-F6 F6
- set key \1380 \kdecF7 ; Control-F7 F7
- set key \1381 \kdecF8 ; Control-F8 F8
- set key \1382 \kdecF9 ; Control-F9 F9
- set key \1383 \kdecF10 ; Control-F10 F10
-
- set key \2408 \kdecF11 ; Alt-F1 F11
- set key \2409 \kdecF12 ; Alt-F2 F12
- set key \2410 \kdecF13 ; Alt-F3 F13
- set key \2411 \kdecF14 ; Alt-F4 F14
- set key \2412 \kdechelp ; Alt-F5 Help (F15)
- set key \2413 \kdecdo ; Alt-F6 Do (F16)
- set key \2414 \kdecF17 ; Alt-F7 F17
- set key \2415 \kdecF18 ; Alt-F8 F18
- set key \2416 \kdecF19 ; Alt-F9 F19
- set key \2417 \kdecF20 ; Alt-F10 F20
-
- ; DEC cursor keypad equivalents:
- set key \327 \kdecfind ; Home Find
- set key \335 \kdecselect ; End Select
- set key \329 \kdecprev ; PgUp Prev Screen
- set key \337 \kdecnext ; PgDn Next Screen
- set key \330 \kdechelp ; Keypad - Help
- set key \334 \kdecdo ; Keypad + Do
- set key \338 \kdecinsert ; Insert Insert Here
- set key \339 \kdecremove ; Del Remove
-
- ; End of VT300.INI
-